|
Surface Disinfectants · Metrex Research CaviCide HP — 24 oz SprayHydrogen peroxide-based, ready-to-use disinfectant with a 1-minute universal contact time — effective against 70 pathogens and fully qualified for EPA List Q's Emerging Viral Pathogen Claim. Ready-to-Use Hydrogen Peroxide Formula EPA Registered EPA List Q Emerging Viral Pathogen Claim Bactericidal Virucidal Tuberculocidal Fungicidal |
| Overview Key Features Kill Claims Directions Specifications Know the Terms Safety Q&A |
Product Overview
CaviCide HP surface disinfectant offers a 1-minute universal contact time against 70 listed pathogens, using a hydrogen peroxide formulation that meets all levels of the EPA's rigorous Emerging Viral Pathogen Claim (EPA List Q) — enveloped viruses, small non-enveloped viruses, and large non-enveloped viruses.
The High-Performance (HP) disinfection protocol of CaviCide HP ready-to-use disinfectant helps protect both patients and staff. Unlike the classic alcohol/quat CaviCide formula, CaviCide HP's hydrogen peroxide chemistry carries a notably mild safety profile, so it delivers hospital-grade disinfection in just 60 seconds without the stronger handling precautions that come with alcohol-based products. This 24 oz spray bottle is sold individually — grab one for a spot-treatment station, a quick-turnover room, or anywhere staff want the fastest possible contact time on hand.
|
Why facilities choose CaviCide HP It's the fastest contact time in the CaviCide family — 1 minute instead of 2 to 3 — backed by the broadest pathogen claim yet (70), full EPA List Q qualification, and a hydrogen peroxide chemistry rated at the EPA's mildest toxicity category. |
|
|
|
Key Features
|
|
||
|
|
||
|
|
Kill Claims & Contact Time
CaviCide HP's hydrogen peroxide formula uses one universal contact (dwell) time — how long the surface needs to stay visibly wet — across every organism on the label, rather than different wait times for different pathogens.
| Organism / Pathogen Type | Contact Time | Examples |
|---|---|---|
| Bacteria | 1 minute | Staph aureus, E. coli, Salmonella, Pseudomonas |
| Mycobacteria | 1 minute | Mycobacterium tuberculosis (TB) |
| Fungi | 1 minute | Candida auris, Candida albicans |
| Enveloped viruses | 1 minute | HIV-1 (surrogate), Influenza A/B, Herpes simplex, SARS-CoV-2 |
| Small non-enveloped viruses | 1 minute | Norovirus — among the hardest viruses to kill |
*Bactericidal, virucidal, tuberculocidal, and fungicidal claims are based on standardized lab testing per the EPA-approved product label. Always confirm current claims and contact times against the label on your specific bottle.
Directions for Use
One-Minute Disinfection
| 1. If the surface has visible soil or debris, remove it first. |
| 2. Spray the surface, using enough product to thoroughly wet it. |
| 3. Allow the surface to remain visibly wet for the full 1-minute contact time. |
| 4. Let air dry, or wipe with a clean cloth. Rinse if desired for food-contact surfaces. |
Storage Tip
Keep the bottle's cap or trigger nozzle closed when not in use, and store at room temperature out of direct sunlight to help preserve the hydrogen peroxide formula's effectiveness. Always confirm the exact directions, precautions, and contact times printed on your specific product label.
Product Specifications
| Product Name | CaviCide HP Surface Disinfectant |
| Container Size | 24 oz Spray Bottle |
| Quantity | Each (sold individually) |
| Form | Ready-to-use liquid spray |
| Chemistry | Hydrogen peroxide-based formula |
| EPA Toxicity Category | IV (mildest category; no signal word required) |
| Product Dimensions | 3.63″ x 10.25″ x 3.63″ |
| Weight | 1.75 lbs |
| Intended Use | Hard, non-porous surfaces |
| Recommended Settings | Medical, dental, veterinary, laboratory, and other professional clinical environments |
Know the Terms
New to disinfectant labels? Here's a quick, plain-language cheat sheet for terms you'll see on this page and on the product label itself.
|
|
||
|
|
||
|
|
Safety & Precautions
|
Please read before use • CaviCide HP is rated EPA Toxicity Category IV — the mildest of the EPA's four hazard categories — so no signal word (Caution, Warning, or Danger) is required on its label. • It's intended for hard, non-porous surfaces only — not for use on skin. • As a general precaution, avoid contact with eyes; rinse with water if it happens. • Wash hands after use as a standard hygiene practice. • Keep out of reach of children and pets. For professional/commercial use. • Store at room temperature in a cool, dry area away from direct sunlight, and keep the container sealed when not in use. • Always read and follow the complete product label and Safety Data Sheet (SDS) before use — this page is a summary, not a substitute for the label. |
Questions & Answers
|
What is CaviCide HP used for? CaviCide HP is a ready-to-use hydrogen peroxide surface disinfectant used to clean and disinfect hard, non-porous surfaces. Its High-Performance (HP) protocol is built for clinical, laboratory, and patient care settings that need very fast, broad-spectrum disinfection. |
|
What makes CaviCide HP different from the classic CaviCide formula? CaviCide HP uses a hydrogen peroxide-based formula instead of the classic low-alcohol/quat chemistry. It offers a faster 1-minute universal contact time (versus 2-3 minutes), is effective against 70 pathogens, and fully qualifies for the EPA's Emerging Viral Pathogen Claim under List Q. It also carries a milder EPA toxicity rating. |
|
How long does CaviCide HP need to stay wet on a surface? One minute for every organism on the label. CaviCide HP uses a single universal contact time, so there's no need to track different wait times for different pathogens. |
|
What is EPA List Q and the Emerging Viral Pathogen Claim? EPA List Q is the EPA's current list of disinfectants qualified under its Emerging Viral Pathogen (EVP) program, which lets a product claim effectiveness against newly emerging viruses not yet named on its label. To qualify at every tier, a product must prove itself against enveloped viruses (easiest to kill), large non-enveloped viruses, and small non-enveloped viruses (hardest to kill, like norovirus). CaviCide HP qualifies at all three tiers. |
|
What is the active ingredient in CaviCide HP? CaviCide HP's active ingredient is hydrogen peroxide, rather than the alcohol and quaternary ammonium compounds used in the classic CaviCide line. This gives it a different mode of action and a milder safety profile. |
|
Is CaviCide HP safe to use around patients and staff? CaviCide HP is rated EPA Toxicity Category IV, the mildest of the EPA's four hazard categories, meaning no signal word (Caution, Warning, or Danger) is required on its label. It's still intended for surfaces only, not for use on skin, and standard precautions still apply. |
|
Is CaviCide HP EPA registered? Yes. CaviCide HP is EPA registered and qualifies for EPA List Q. Check the registration number printed on your specific bottle's label to confirm the exact registration for your product. |
|
Do I need to rinse the surface after using CaviCide HP? For most environmental surfaces, no rinsing is required once the contact time has been met. For food-contact surfaces, rinse or follow the specific instructions on the product label. |
|
How should CaviCide HP be stored? Store CaviCide HP at room temperature in a cool, dry area away from direct sunlight, and keep the container sealed when not in use to preserve the hydrogen peroxide formula's effectiveness. |
|
For Professional/Commercial Use. Always read and follow the complete product label and Safety Data Sheet (SDS) before use. Efficacy claims, directions, and precautions summarized here are based on the manufacturer's published product information and are provided for general reference only — the physical product label always governs actual use. CaviCide is a registered trademark of Metrex Research, LLC. |
